Registrieren Anmelden                     Währungen:
简体中文日本语EnglishDeutsch
Kategorien
Warenkorb: in ihrem korb   0 produkte
Neue Produkte
Panzerkampfwagen VI Tiger (P)
Panzerkampfwagen VI Tiger (P)
0.00
Startseite » Katalog » Alle » Vehicle Control Unit » E66043 » Vehicle Control Unit E66043
[E66043]
MCU E66023

Overview

VCU series controller uses 4 channels RC system to control R/C tank's forward/backward movement, sharp turning, pivoting, turret rotation and gun barrel evaluation at variable speed.

Plug-and-Play design for upgrading HL 1/16 RC Tank.

20A track motor driver.

22KHz, 8-bit high quality sound with digital sound mixer.

Maximum of 5 channel of sound track, main gun, machine gun, turret rotate, gun barrel elevation and engine sound can be generated at the same time.

3W sound output power.

Support air-soft gun with sound synchronization.

 Support TAMIYA and HL IR battle unit and format. 

Support RealEngine function.

Support RealRecoil servo port.  

 Safety shutoff prevents unwanted movement while signal lost. 

Auto R/C  signal detection

Variant

VCU

Remote Control Syste

4-CH AM, FM or 2.4G

TAMIYA IR battle

YES

Heng-Long IR battle

YES

Engine Sound rendering

Frequency shift mode( Like el-mod)

RealEngine( Patent Pending)

NO

Track driver

20A

Turret Rotation Speed Control

YES

Gun Elevation Speed Control

YES

Gun Elevation Servo Port

NO

AirSoft with Sound Synchronization

YES

RealRecoil ( Patent Pending)

YES

Smoker driver

YES

Head Light switch sound

YES

Head Light on/off control

YES

Tank Personalization

YES

elease Schedule

2012/8/31

 

Accessories

Part Number

Description

SONY TV REMOTE For Tank Personalization, we can help to buy from local TV Store.

Per order

Switch cable

Switch + 30cm cable to connect to SW connector on MCU, not required for Heng-Long Tank

Per order

IR LED Cable

5mm IR LED + 30cm cable to connect to J1

Per order

TBU Apple

Base and cable to connect MCU board to TAMIYA Battle Unit.

Per order

Control Mode and operation

Engine sound on/off  

Cannon elevation

Booming Cannon

Fire MG

Head light control on/off
Tank move forward and backward
Right and  Left turn

Turret rotation

Specification

Part Number

Parameter

  Value

Unit

VCU E66013/VCU E66023/VCU E66083/VCU E66143/VCU E66043/VCU E66053

 

 

 

Maximum current of track ESC

20

A

Maximum current of turret and cannon elevation ESC

7

A

Maximum supply voltage

7.4

V

Minimum supply voltage

7.2

V

Assembly Guide

Inspect metal portion on FETs and make sure they are not touched to each other after shipment.

Disconnect RX-18 and plug cables to the same connector on TKs,.

Set Sound Volume to middle

Connect a switch to Switch Cable Port, just to short 2 pins in SW port if you are using HL tank. ,

Connect a recoil servo to J2,

Set CH1, 2 and 3 trimmer on transmitter to center position, Set CH4 trimmer on transmitter to most left or right  position,

Power on MCU board and transmitter, you should hear turret traverse sound. if not, please contact us.

gently move CH4(Multi function control signal 2) trimmer to center till turret traverse is gone.

gently move CH2(Throttle ) trimmer up and down if you hear motor hum sound.

Cannon firing sound should be generated and recoil servo should moves when move CH3 stick to most top position, if not, gently move CH3(Multi function control signal 2 ) trimmer up and down till it work correctly.

You are all set.

 

 



89.95

Dieses Produkt haben wir am Dienstag, 12. September 2017 in unseren Katalog aufgenommen.
Bewertungen