This is the finished Maus Super Heavy Tank Model.including two main gear boxes(metal),turret rotation,barrel elevation,barrel recoil 3 servo gear boxes. This finished model is not including the metal gun barrel,VCU and other electronic equipments,RC devices,battery,glue paint and so on. If you want to install the additional equipments please order in advance and explain the installation requirements in detail.

This is the finished MAUS Model (FPV VERSION ). include VCU,2.4G RC,FPV camera,FPV Glasses,IR Battle system,Smoke generator

Overview VCU series controller uses 4 channels RC system to control R/C tank's forward/backward movement, sharp turning, pivoting, turret rotation and gun barrel evaluation at variable speed. Plug-and-Play design for upgrading HL 1/16 RC Tank. 20A track motor driver. 22KHz, 8-bit high quality sound with digital sound mixer. Maximum of 5 channel of sound track, main gun, machine gun, turret rotate, gun barrel elevation and engine sound can be generated at the same time. 3W sound output power. Support air-soft gun with sound synchronization.  Support TAMIYA and HL IR battle unit and format.  Support RealEngine function. Support RealRecoil servo port.    Safety shutoff prevents unwanted movement while signal lost.  Auto R/C  signal detection.  Variant VCU Remote Control Syste 4-CH AM, FM or 2.4G TAMIYA IR battle YES Heng-Long IR battle YES Engine Sound rendering Frequency shift mode( Like el-mod) RealEngine( Patent Pending) NO Track driver 20A Turret Rotation Speed Control YES Gun Elevation Speed Control YES Gun Elevation Servo Port NO AirSoft with Sound Synchronization YES RealRecoil ( Patent Pending) YES Smoker driver YES Head Light switch sound YES Head Light on/off control YES Tank Personalization YES elease Schedule 2012/8/31   Accessories Part Number Description SONY TV REMOTE For Tank Personalization, we can help to buy from local TV Store. Per order Switch cable Switch + 30cm cable to connect to SW connector on MCU, not required for Heng-Long Tank Per order IR LED Cable 5mm IR LED + 30cm cable to connect to J1 Per order TBU Apple Base and cable to connect MCU board to TAMIYA Battle Unit. Per order Control Mode and operation Engine sound on/off   Cannon elevation Booming Cannon Fire MG Head light control on/off Tank move forward and backward Right and  Left turn Turret rotation Specification Part Number Parameter   Value Unit VCU E66013/VCU E66023/VCU E66083/VCU E66143/VCU E66043/VCU E66053       Maximum current of track ESC 20 A Maximum current of turret and cannon elevation ESC 7 A Maximum supply voltage 7.4 V Minimum supply voltage 7.2 V Assembly Guide Inspect metal portion on FETs and make sure they are not touched to each other after shipment. Disconnect RX-18 and plug cables to the same connector on TKs,. Set Sound Volume to middle Connect a switch to Switch Cable Port, just to short 2 pins in SW port if you are using HL tank. , Connect a recoil servo to J2, Set CH1, 2 and 3 trimmer on transmitter to center position, Set CH4 trimmer on transmitter to most left or right  position, Power on MCU board and transmitter, you should hear turret traverse sound. if not, please contact us. gently move CH4(Multi function control signal 2) trimmer to center till turret traverse is gone. gently move CH2(Throttle ) trimmer up and down if you hear motor hum sound. Cannon firing sound should be generated and recoil servo should moves when move CH3 stick to most top position, if not, gently move CH3(Multi function control signal 2 ) trimmer up and down till it work correctly. You are all set.

 

 

Optional Part To install the smoke generator system to the finished model

Optional Part This equipment can simulate the real engine exhaust function of a tank.and the exhaust volume can change with the speed.it needs special smoke oil.and it's including the oil pool,pump,control panel and so on.

Absolutely Necessarily Part 3003 standard servo

Absolutely Necessarily Part Futaba S9252 Servos This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector Pre-Installed. This servo can produce high-current draw from your batteries If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction. Coreless motor Dual ball bearings on the output shaft Plastic/nylon gear train Moderately high speed High current, high capacity wire lead with low resistance Case is made of Black plastic Dust and water resistant (Not waterproof) Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft. One year warranty INCLUDES: One Digital All Purpose Servo w/Small Round Horn Four Rectangular Grommets Four Brass Bushings Four Mounting Screws One Large Round Horn One Six Arm Horn SPECS: Speed: 0.14 sec/60° @ 4.8V Torque: 92 oz-in (6.6 kg-cm) @ 4.8V Weight: 1.8oz (50g) Power Supply: 4.8V (Futaba does not recommend using 6V) Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm) COMMENTS: S9252 Digital Servo Precautions: -It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series ,minimizing lead lengths, and/or removing Y-harnesses. -Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points. (1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6V which will damage the gyro. (2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time. (3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery. When Used With GY501 Gyro: Switch the GY501 servo frame rate function (Frm) from "NOR" to "High" to display the performance of the gyro to the fullest. Setting Method: (1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate Setup Screen. (2) Press the DATA+ or - key to display "High". This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

Absolutely Necessarily Part Performence is similar to the FUTABA3003 standard servo. The ARTR is already including this Servo.

Absolutely Necessarily Part
1. Number of channels: 6.
2. Application: fixed wing, car, ship.
3: frequency band: 2.400GHz-2.483GHz.
4. Transmit power: ≦ 100mW.
5. Working current: ≦ 120mA
6. Encoding method: PCM1024.
7: fine tuning mode: electronic fine tuning mode.
8: dynamic range of rocker is 80% - 120%.
9: power supply: 6V(4 section 5 electric pool)
10: mixed control mode: delta wing mixing mode and V - type tail rotor mixing mode.
11: reverse switch: 1 channel aileron, 2 channel lift, 3 channel throttle, 4 channel direction.
12: support fixed wing for landing gear and wings.
13: low voltage hint: battery voltage is equal to 8.4V, power indicator 500MS display 1 time.
14: modulation mode: adopt the latest global and European standard FHSS model.

Absolutely Necessarily Part Intelligent charger with many advanced features.such as automatic detection,automatic constant current,automatic power failure,and it can charger various types of batteries.

Absolutely Necessarily Part Charger for NI-MH battery, rechargerable 6V-12V battery.

Absolutely Necessarily Part 7.2V3AH NI-MH battery, high current discharger, and including 6 SC monomers.

Optional part Miniature photography transmitter module，used for AFV and warship,including CMOS camera（360 lines），2.4G wireless video transmitter,the standard receiver plug，utilize the electronic from the receiver.Containing 4 HZ,please make sure when you buy this.Generally recommend installed in a vehicle, or loading hand, the bridge position of the ship. Can use any 2.4 G video receiver to trans images.

7“ LCD high-definition displays

Optional Part M7 RC display kit,including 7" LCD display，lens hood,foldable RC stand,pow line "Y",T plug turn DC LINE set.Display detailed technical parameters: PLUG:2 channel AV video input (without power supply, not audio) LCD screen aspect ratio:16:9 Visual Angle:270° Power voltage:DC 12V Light lumen (center):350 Distinguishability:480×234 Screen size:7"(mm)154(H)×86.5(V) current consumption:0.5A Net weight:280g anti-vibration lever:5