This KIT include all parts to assemble a elephant model (RC).with two gear boxes (metal),turret rotation,barrel elevation,barrel recoil 3 servo gear boxes. and it's not including the metal gun barrel,VCUand other electronic equipments,RC devices,battery,glue,paint and so on.

This KIT include all parts to assemble a elephant model(static). not include the two main gear boxes(metal),turret rotation,barrel elevation,barrel rccoil 3 servo gear boxes.metal gun barrel,VCU and other electronic equipments,RC devices,battery,glue,paint and so on.

This is the finished Elephant Jagdpanzer Model.including two main gear boxes(metal),turret rotation,barrel elevation,barrel recoil 3 servo gear boxes. This finished model is not including the metal gun barrel,VCU and other electronic equipments,RC devices,battery,glue paint and so on. If you want to install the additional equipments please order in advance and explain the installation requirements in detail.

Optional Part This Alloy Case is made by slive alloy board and shape suit soft EVA.the best choice to protect tank for carry. we recommend when by the finished model to by this alloy case together. However,Because of the uncontrolable factors we can't ensure that the model is no damaged in the transportion.

Optional Part This standard carton is made by EPE foam.the best choice to protect tank for carry. we recommend when by the finished model to by this carton together. However,Because of the uncontrolable factors we can't ensure that the model is no damaged in the transportion.

Optional Part To install the smoke generator system to the finished model

Optional Part This equipment can simulate the real engine exhaust function of a tank.and the exhaust volume can change with the speed.it needs special smoke oil.and it's including the oil pool,pump,control panel and so on.

Absolutely Necessarily Part 3003 standard servo

Absolutely Necessarily Part Futaba S9252 Servos This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector Pre-Installed. This servo can produce high-current draw from your batteries If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction. Coreless motor Dual ball bearings on the output shaft Plastic/nylon gear train Moderately high speed High current, high capacity wire lead with low resistance Case is made of Black plastic Dust and water resistant (Not waterproof) Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft. One year warranty INCLUDES: One Digital All Purpose Servo w/Small Round Horn Four Rectangular Grommets Four Brass Bushings Four Mounting Screws One Large Round Horn One Six Arm Horn SPECS: Speed: 0.14 sec/60° @ 4.8V Torque: 92 oz-in (6.6 kg-cm) @ 4.8V Weight: 1.8oz (50g) Power Supply: 4.8V (Futaba does not recommend using 6V) Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm) COMMENTS: S9252 Digital Servo Precautions: -It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series ,minimizing lead lengths, and/or removing Y-harnesses. -Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points. (1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6V which will damage the gyro. (2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time. (3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery. When Used With GY501 Gyro: Switch the GY501 servo frame rate function (Frm) from "NOR" to "High" to display the performance of the gyro to the fullest. Setting Method: (1) Press the GY501 FUNC+ or - key to call the Servo Frame Rate Setup Screen. (2) Press the DATA+ or - key to display "High". This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

Absolutely Necessarily Part Performence is similar to the FUTABA3003 standard servo. The ARTR is already including this Servo.

Upgrades Part It's made by the precision turning aluminum alloy and the surface is special treatmented.this part is not included in the KIT,so need to buy separately.

FREE SHIPPING

Already Contained This gear box is special for the tank host.it can pass the high-power,high-torque.including self-locking function.fit with 380 brush motor and brushless motor.a model tank needs a pair of this gear box(left and right).it's contained in the standard KIT,but also can be purchased separately. Motor gear box has been pre-installed TURBINE 380X.

Absolutely Necessarily Part
1. Number of channels: 6.
2. Application: fixed wing, car, ship.
3: frequency band: 2.400GHz-2.483GHz.
4. Transmit power: ≦ 100mW.
5. Working current: ≦ 120mA
6. Encoding method: PCM1024.
7: fine tuning mode: electronic fine tuning mode.
8: dynamic range of rocker is 80% - 120%.
9: power supply: 6V(4 section 5 electric pool)
10: mixed control mode: delta wing mixing mode and V - type tail rotor mixing mode.
11: reverse switch: 1 channel aileron, 2 channel lift, 3 channel throttle, 4 channel direction.
12: support fixed wing for landing gear and wings.
13: low voltage hint: battery voltage is equal to 8.4V, power indicator 500MS display 1 time.
14: modulation mode: adopt the latest global and European standard FHSS model.

Absolutely Necessarily Part Intelligent charger with many advanced features.such as automatic detection,automatic constant current,automatic power failure,and it can charger various types of batteries.

Absolutely Necessarily Part Charger for NI-MH battery, rechargerable 6V-12V battery.

Absolutely Necessarily Part 7.2V3AH NI-MH battery, high current discharger, and including 6 SC monomers.

Optional part Miniature photography transmitter module，used for AFV and warship,including CMOS camera（360 lines），2.4G wireless video transmitter,the standard receiver plug，utilize the electronic from the receiver.Containing 4 HZ,please make sure when you buy this.Generally recommend installed in a vehicle, or loading hand, the bridge position of the ship. Can use any 2.4 G video receiver to trans images.

7“ LCD high-definition displays